• Seametrics Flow Meter
  • Site Lab Ultrasonic Flow Meter
  • Siargo Gas Mass Flow Meter
  • VSE Positive Displacement Flow Meter
  • Tek Air HVAC Air Flow Meter
  • Gerand Fire Pump Test Flow Meter
  • Nanabosh Electrical Circular Connector
  • Sibas Heavy Duty Electrical Rectangular Connector
  • Daiwa Dengyo Electrical Safety Plug Connector
  • Gast Pneumatic Air Motor
  • Mecon Flow Meter
  • Rheonik Coriolis Mass Flow Meter
  • Sage Metering Thermal Mass Flow Meter
 

  • WIRATAMA MITRA ABADI
  • PHONE : 085103019945, 085105062090, 081282084779, 085100711033
  • FAX : +62-21-8855857
  • E-MAIL : Sales@wmablog.com
  • CONTACT : Ira, Kusuma dewi, Yati, Yugo

 

MECON STAUDEX - CAUSTEX SERIES - FLOW CONTROLLER

 

Mecon Staudex Flow Controller or Flow monitor for any flow direction suitable for liquids and gases


Applications
The Staudex is applicable for flow monitoring of liquids and gases in closed pipes (DN 32 - DN 500) with either vertical or horizontical flow direction. The instrument is also suitable for open channel applications.

Mecon Staudex

 

On falling below or exceeding a factory set flow velocity an output contact is opened or closed which is used for controlling purposes.

Highlights
sturdy and simple design
suitable for both pipes DN 32-DN 500 and open channel
resistant against overload and reverse flow
available for pressures up to 40 bar (580 psi)
freely choice of flow direction
Design / operating principle
The Staudex consits of a baffle plate with a diameter of about 20 mm (0.78") on a balance beam. The baffle plate is deflected by the fluid and this movement is transmitted magnetically to a contact mechanism. Here the fluid is completely isolated from the contact unit.

The instrument will be mounted laterally in the piping by the integrated flange.

Technical data - Staudex

Contact response 0.4 - 0.6 m/s (default setting)
Repeatability ± 2 %
Pressure limits max. 40 bar (580 psi)
Temperature limits -30 °C to +120 °C (-22 °F to 248 °F)
Flow directions vertically upwards
horizontically from left to right
horizontically from right to left
vertically downwards
Process connections DIN 2501: DN 25
ANSI B 16.5: 1"
Options Output switch

Custex
Sturdy flow indicator designed for high temperatures
The Custex was designed for flow controlling and measuring of liquids and gases in closed pipes. Because of the sturdy design it is also suitable for harsh operating conditions.

Mecon Caustex

 

Highlights
applicable for high temperature and high pressure
simple and sturdy design (magnetic coupling)
no inlet and oulet pipes required


Technical data - Custex

Measuring ranges Liquids: 1.25 - 320 m³/h
Gases: 19 - 4,800 m³/h
Accuracy class 2,5 % of URV
Pressure limits max. 40 bar (580 psi)
Temperature limits max. 350 °C (662 °F)
Flow directions horizontally from left to right
horizontally from right to left
upwards to horizontal direction
Process connections DIN ISO 228:G ¼ - G 1
ANSI B1.20.1: NPT ¼" - 1"
Options Thermal protection
Magnetic spring contact
Inductive contact