• Seametrics Flow Meter
  • Site Lab Ultrasonic Flow Meter
  • Siargo Gas Mass Flow Meter
  • VSE Positive Displacement Flow Meter
  • Tek Air HVAC Air Flow Meter
  • Gerand Fire Pump Test Flow Meter
  • Nanabosh Electrical Circular Connector
  • Sibas Heavy Duty Electrical Rectangular Connector
  • Daiwa Dengyo Electrical Safety Plug Connector
  • Gast Pneumatic Air Motor
  • Mecon Flow Meter
  • Rheonik Coriolis Mass Flow Meter
  • Sage Metering Thermal Mass Flow Meter
 

  • WIRATAMA MITRA ABADI
  • PHONE : +6285103019945, +628105062090, +6281282084779
  • FAX : +62-21-8855857
  • E-MAIL : Sales@wmablog.com
  • CONTACT : Ira, Kusuma dewi, Yati, Yugo

 

SEAMETRICS FLOWMETER - EX80 SERIES - ELECTROMAGNETIC FLOWMETER

.

.Ínsertion Electromagnetic Flow Meter EX-80 Series - Seametrics

Seametrics EX80-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.The EX80 is highly suitable for diffcult applications with changing viscosities and pulsating fows, such as air-driven diaphragm pumps. With no moving parts, these meters can be used in “dirty” applications where debris would foul a mechanical meter. Like all magmeters, when used in chemical injection applications, these meters should be installed upstream of the chemical line (or far enough downstream to allow complete mixing of fuids before the meter).

Seametrics Electromagnetic Flow Meter EX80 Series

Low-flow performance and accuracy superior to any mechanical flow sensor

No moving parts to wear out

Dedicated fittings for simplicity

Retainer clip automatically sets correct depth

Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris

Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC

Available for pipe sizes 1" to 8", in brass, 316 stainless, and PVC


Designed for modularity and versatility, the EX80-Series has a current-sinking pulse output that can be combined with the appropriate transmitter or indicator for the application. For analog output and display of rate and total, an FT420 can be used. Blind analog output is provided by the AO55. The PD10 can be used to divide the pulse for pacing chemical metering pumps and the DL76 (data logger) is also compatible. Modules can be wall- or meter- mounted. If the EX80 meter is used with a programmable controller, the output signal can be fed direct, with no other conditioning required.


EX80-Series fxed depth insertion meters require special fttings. Factory installation in the ftting ensures correct depth placement in the pipe. The EX80-Series meter can be ordered in a full power model when a source of electricity is available, or in a low power model that can run on an external battery with solar panel.Reverse fow output and immersibility are optional.

FEATURES
• No moving parts
• Economical
• Durable
• Easy to install
• Easy to maintain

APPLICATIONS
• Conductive fuids
• Small pipe applications (1”-12”)
• Industrial processes
• Chemical metering pumps
• Fertigation

 

 

Download Data Sheet

Back to previous page (Kembali ke halaman sebelumnya)